more mods

mods/xdecor/extra_mods/README.md

@@ -0,0 +1,6 @@
+The `extra_mods` directory contains extra mods for X-Decor-libre.
+
+X-Decor-libre itself should NOT execute any of the code in this directory directly.
+
+This directory is meant for special mods that you, the user
+are supposed to install manually (if you need them).

mods/xdecor/extra_mods/xdecor_autocut/LICENSE.txt

@@ -0,0 +1,29 @@
+-- Modified BSD License --
+
+Copyright (c) 2025 Wuzzy <Wuzzy@disroot.org>
+All rights reserved.
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright
+  notice, this list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright
+  notice, this list of conditions and the following disclaimer in the
+  documentation and/or other materials provided with the distribution.
+* Neither the name of the copyright holder nor the names of contributors
+  may be used to endorse or promote products derived from this software
+  without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+-- End of Modified BSD License --

mods/xdecor/extra_mods/xdecor_autocut/README.md

@@ -0,0 +1,85 @@
+# X-Decor-libre Autocut [`xdecor_autocut`]
+
+## Version
+
+This is version `1.0.0` of `xdecor_autocut`, compatible
+with version `libre14` or later of X-Decor-libre.
+
+## Description
+
+This is a companion mod for X-Decor-libre [`xdecor`].
+
+It automatically adds many more “cut” variants for most
+cube-shaped nodes in the game so the player can cut more
+nodes at the workbench. This does not guarantee that
+all added cut nodes will look pretty, however,
+as the nodes will be added automatically and are
+not carefully curated.
+
+By default, X-Decor-libre only adds cut node variants for
+nodes from itself and the `default` mod.
+
+With this mod, nodes from other mods will be available for
+cutting as well.
+
+This has been the original behavior of X-Decor-libre in the past,
+but it has been removed in version `libre6` due to
+hard-to-debug compatibility issues like naming collisions.
+This mod basically replicates this old behavior, but a bit
+more stable.
+
+## Usage
+
+To use this mod, simply copy the mod folder to your
+`mods` directory of your Luanti user directory and
+then enable it for your world like any other world.
+
+### Note for server operators
+
+You should probably not use this mod except for
+compatibility with old versions of X-Decor-libre
+or X-Decor.
+
+If you are just now adding X-Decor-libre or
+start with a fresh world, you’re probably better
+off in writing a small mod to *explicitly* make
+each node you want to be made cut cuttable, to
+prevent to pollute your server with garbage nodes.
+See `src/workbench.lua` for details.
+
+This mod mainly exists because if will be useful if
+your server used an older version of X-Decor-libre
+or X-Decor that aggressively added many cut nodes
+which have become unknown nodes in newer versions,
+because since X only nodes from X-Decor-libre
+and the `default` mod are cuttable, for safety
+reasons.
+If your world contains some cut nodes from any
+other mod, and they have become unknown after
+you upgraded of X-Decor-libre, this mod is for you.
+
+Please note that this aggressive automatic
+adding of cut nodes is not guaranteed to give you
+the best quality. Some nodes that you probably
+do not want to be cut will be cuttable, some nodes
+might look ugly in their cut form, especially
+custom glass nodes. It is recommended you check your
+logs for `[xdecor_autocut]` messages to see which
+nodes have been made cuttable.
+
+However, this mod should still be relatively safe to
+use, because it now checks for naming collisions.
+If it detects that any of the required node names
+for cut nodes is taken, it will refuse to add any
+cut node variants and print a message in the log.
+
+### Note for modders
+
+You can prevent any node from being having cut node
+variants added to it by adding the group
+`not_cuttable=1` to it.
+
+## License
+
+This mod is free software, distributed under the Modified
+BSD License (see `LICENSE.txt`).

mods/xdecor/extra_mods/xdecor_autocut/init.lua

@@ -0,0 +1,22 @@
+minetest.register_on_mods_loaded(function()
+	local nodes = {}
+	-- Iterate through all nodes, select nodes allowed to be cut
+	-- Only the regular, solid blocks without metas or explosivity can be cut
+	for nodename, def in pairs(minetest.registered_nodes) do
+		if xdecor.stairs_valid_def(def) then
+			if not xdecor.is_cut_registered(nodename) then
+				if xdecor.can_cut(nodename) then
+					table.insert(nodes, nodename)
+				else
+					-- Not all of the available node names are available
+					-- for X-Decor-libre to add: Skip this node
+					minetest.log("action", "[xdecor_autocut] Skipped adding cut nodes for "..nodename.." because at least one of the required nodenames is already taken")
+				end
+			end
+		end
+	end
+	for n=1, #nodes do
+		xdecor.register_cut(nodes[n])
+		minetest.log("action", "[xdecor_autocut] Registered cut nodes for: "..nodes[n])
+	end
+end)

mods/xdecor/extra_mods/xdecor_autocut/mod.conf

@@ -0,0 +1,3 @@
+name = xdecor_autocut
+description = Automatically add cut nodes variants for many nodes for X-Decor-libre’s workbench
+depends = xdecor